Foraging Pully DIY Toy

Hello friends! Today I’m going to be showing you how to make this cute foraging pully toy. ๐Ÿ™‚ Gliders love pullies. They’ll often carry the rings back to their pouch to nest with. This is super easy and doesn’t require a lot of time or materials.

What You’ll Need:

  • A small plastic container
  • Three pieces of small chain
  • Three plastic bracelets
  • Three c-link
  • Three mini links
  • One zip tie
  • Charms (optional)

Start off by making three holes in the plastic container. The easiest way to do this is to heat up something metal (like a skinny screwdriver) and then just melt the plastic. This creates smooth holes that won’t be dangerous for the gliders. You’ll need to make one hole in the bottom and two holes in the top. Then set it aside.

(That hole there isn’t perfect, I was still working on getting it smooth. You can file it down with a nail filer.)

You’re going to take one of your bracelets and slip the chain through it. Then attach one mini link to each end of the chain. Then attach the other two bracelets to the mini links. This is the pully part of the toy.

Next you’re going to attach a mini link to the blue bracelet. Hold that up to the hole. Slip the zip tie through the mini link and back through the hole. Tighten it down and then cut it off as close as you can. Be sure to remove/file down any sharpness that’s left.

So the pully is now attached to the foraging cup.

Take the other two chains. If you’re putting on extra charms, attach them with mini links.

I made the two other holes here. Again, they’re not perfectly smooth yet.

Put a c-link at the end of the of each chain. (Note: in the picture below, I attached them with mini links. I ended up changing that later because the mini links aren’t great for holding weight.) Slip those through the holes in the cup. Then use the last c-link to attach the chains together.

And that’s it! Hang the toy into the cage. You can fill the cup with pompoms and hide treats in there. ๐Ÿ˜‰

Where To Buy…

Chain

Bracelets

C-links and mini links

Charms

~Hattush

  One thought on “Foraging Pully DIY Toy

  1. April 20, 2021 at 2:08 pm

    AH, this was adorable. ๐Ÿ˜‚๐Ÿ˜ I love all the toys you make.

    Liked by 1 person

Leave a Reply to Hattush Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: